Highly Reliable Systems: Removable Disk Backup & Recovery

New Largest Hard Drive Will Contain Helium

By Darren McBride

HGST, a division of Western Digital, announced what experts expect will be a 5.6TB 3.5″ form factor hard drive sometime in 2013.  The new largest hard drive will contain helium rather than air and will have 7 platters.  Helium is 1/7 the density of air, which much less drag on the spinning disks.  It also reduces the “fluid flow” forces which buffet the heads and arms.  The story is interesting enough that it’s being picked up by magazines such as SMBnation.

Disk platter wobble or vibration is a significant factor in limiting hard drive storage density. The spinning motion causes air turbulence, which in turn disrupts both the platter and the read/write head’s ability to remain on track. With helium the turbulence is reduced, allowing the drive to pack more bits onto the platter while still allowing precise head positioning.

HGST also plans to pack 7 platters into the enclosure rather than only the 5 used for current 4TB drives.  The helium inside will lead to less power usage and cooler drive operation.  The company says power usage is lowered by 23% by using helium and that the drive runs 4 degrees Celsius cooler.  Using helium along with heat-assisted magnetic recording may lead to 60TB drives by 2016.

Helium is becoming a scarce commodity, as only 6 companies in the world refine and supply it.  It is extracted in small percentages from certain natural gas deposits. Once Helium is released (as when a balloon pops) it escapes into the atmosphere and is gone from earth forever. Today there are only about 15 known sources of helium in the world and 10 of these are in the United States, largely controlled by the Bureau of Land Management (BLM). Planned and unplanned outages throughout the world along with changes in a U.S. law called the Helium Privatization Act of 1996 (HPA) have impacted these limited supplies.   20% of the entire world’s output of helium is used for MRI machines and about 17% is used in welding.  Another chunk is used to manufacture LCD screens.  Helium price and availability could become an issue in manufacturing although it is unknown whether the small volumes used in hard drives will significantly impact the supply chain.

HGST plans to concentrate initially on the enterprise and data center market. This, along with the Helium discussion above, suggests the drive will come at a price premium above the desktop drives shipped today.

As for reliability of this new technology, we’ll have to put our trust in the engineers and then see how they do in the field.  Very sophisticated and tightly controlled seals will be needed since the molecules are very small and will leak out of the smallest openings easily. We wonder if drives will ever need to be “refilled” to maintain and freshen the helium as is the case with some air conditioning systems.   We’ll also have to wait to see whether the drives are robust enough to be used in removable drive backup systems like the RAIDFrame.

Darren McBride

About Darren McBride

CEO, Highly Reliable Systems, Inc. View all posts by Darren McBride →

12 Responses to New Largest Hard Drive Will Contain Helium

  1. bane says:


  2. Todd says:

    But will the drive be squeaky?

  3. Nick says:

    I don’t understand why they’re using helium when hydrogen is much more abundant and just as thin?

  4. Joe Vackipp says:

    Helium? I guess it would make our laptops lighter….. Solid State Drives seem like a better solution down the road…. 4 TB HDD drives seem plenty big enough for now…. I guess people will think about buying stock in Helium after reading this article.

    • Simon says:

      Gates said 640K would be enough… I need to have 12Tb online, and it’s growing at the rate of 1Tb per year…

  5. Jim says:

    Helium is a noble gas and does not react with other substances. Hydrogen is reactive and corrosive and could cause water condensation inside the drive if any oxygen (air) leaked in.

  6. Norman says:

    Why don’t they just suck the air out and create a vacuum?

    • Patrick says:

      I think they need something to balance the platters while spinning otherwise they would vibrate too much and would be useless

    • Aboron says:

      Some reasons not to use a vacuum.

      1) Electricity behaves much differently in a vacuum environment (remember vacuum tubes) so doing this might turn the inside of the drive into a swirl of lightning arcing in all directions.

      2) Vacuum doesn’t conduct heat like a gas would, so using the the heat assisted recording heads might soon warp the platters from lack of proper dissipation.

  7. Tony says:

    What about using a partial vacuum to give same density as helium, that would solve the stability issue and could even be maintained by a small pump.

What do you think?

Your email address will not be published. Required fields are marked *