NetSwap Email Alert Information

Alert email subject lines are of the form:

<Device Name> Alert: <alert>

The body of the email is of the form:

Hostname : <hostname>
IP Addr X: <ip addr for EthernetX> (1 or more of these lines)
Date/Time: <date and time>
Alert : <alert detail message>

Where <hostname> is the hostname of the device, <date and time> is formatted “Thu Aug 23 14:55:02 2001”, and <alert> and <alert detail message> are defined below for each alert.

Alert	<alert>	<alert detail message>
Device Startup	System Started	System Started
Device Shutdown	System Shutdown	System shutdown on signal <sig num>
Disk Remove	Disk <disk name> removed.	Same
Disk Insert	Disk <disk name> Inserted	Same
Mirror Disk Degraded	Mirror Disk <disk name> is Degraded	Same
Mirror Disk Active	Mirror Disk <disk name> Active <state>	Same
Mirror Disk Inactive	Mirror Disk <disk name> Inactive	Same
Mirror Disk Rebuild Status	Mirror Disk <disk name> X% Complete Mirror Disk <disk name> Rebuild Started	Same
Mirror Disk Rebuild Complete	Mirror Disk <disk name> <Failed\|Completed> Rebuild	Mirror Mirror/Rebuild/Check finished for mirror disk <mirror number> (<disk name>), XX:XX hours, XXXX.XX GB/hour (Possibly followed by: Disk <disk name> is faulty!)
Mirror Disk Fail	Mirror Disk <disk name> Disk Failure	Same
Mirror Disk Fail Spare	Mirror Disk <disk name> Spare Failure	Same
Mirror Disk Disappeared	Mirror Disk <disk name> Disappeared	Same
Disk SMART Ok?	Disk <disk name> SMART Status: Ok? (Advise running diagnostics)	Same
Disk SMART Prefail	Disk <disk name> SMART Status: Prefail (Advise running diagnostics)	Same
Disk SMART Failing	Disk <disk name> SMART Status: Failing	Same
Replication Job Started	Replication Job Started	Job ‘<job name>’ (id:<job id>) started.
Replication Job Completed	Replication Job Completed	Replication job ‘<job name>’ (id:<job id>) completed in <X seconds\|XX:XX minutes\|XX:XX hours>, X files, X errors, XXXX.XX MB, XXXX.XX MB/sec Replication job ‘<job name>’ (id:<job id>) canceled by user Replication job ‘<job name>’ (id:<job id>) completed in <X seconds\|XX:XX minutes\|XX:XX hours>, X sent, X received, XXXX.XX MB/sec
Replication Job Failed	Replication Job Failed	Replication job <job name> (id:<job id>) <reason for failure> reason for failure: source disk ‘<disk name>’ is not installed! source disk ‘<disk name>’ is not mounted! source disk ‘<disk name>’ is in used by another replication job! source disk ‘<disk name>’ not found! destination disk ‘<disk name>’ is not installed! destination disk ‘<disk name>’ is not mounted! unable to create snapshot for disk ‘<disk name>’, error code = X snapshot for disk ‘<disk name>’ is in use failed too many times! invalid! invalid AWS Import/Export Job! invalid AWS Job Id! error getting AWS job status <job id>! error creating AWS import job! unable to get remote location <remote location id>! unable to get seed disk ‘<disk name>’ Mirror disk <disk name> is rebuilding, will not make seed! Mirror disk <disk name> has scheduled mirror in progress, will not make seed! Error marking disk <disk name> as seed: error code X! Unable to seed unknown mirror disk <disk name> Unable to find disk for id X Error unmarking disk <disk name> (<dev>) as seed: error code X Unable to get disk <disk name> when seeding raid Disk <disk name> (<dev>) did not seed mirror, unable to safely remove disk. Disk <disk name> (<dev>) did not seed mirror, failure during mirror create. Disk <disk name> (<dev>) failed to seed mirror, unable to create mirror unable to mount seed disk ‘<disk name>’ error code X unable to get seed disk ‘<disk name>’ unable to remove existing files X failed post prep, error code X failed to write SIGNATURE file X (<err msg>) failed. Sync error code = X (<err msg>) unable to exec ‘<cmd>’ : X (<err msg>) Failed : Rsync I/O timeout Failed : Select error X (<err msg>) is still running! unable to get input stream couldn’t find source job <job id>!
Logged Error	Error Logged	<error message logged (varies)>
Low Disk Space	Disk <disk name> is low on free space, only <free space> free!	Same